{"title":"Railblaza Mounting Options for Birdboss","description":"\u003cp\u003eBirdboss can be connected to a selection of genuine RAILBLAZA mounting products, giving you more ways to install Birdboss on boats, pontoons, rails, biminis, inflatable boats and other surfaces. Choose a clamp-on, adhesive, suction or screw-fixed mount to suit your installation – many need no drilling at all.\u003c\/p\u003e\u003cp\u003eTo connect Birdboss to any of these mounts you will need the \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e. It incorporates a genuine RAILBLAZA StarPort Adaptor, so Birdboss clicks into the mount and lifts out in seconds when you’re using your boat.\u003c\/p\u003e\u003cp\u003eNot sure which mount to choose? Read our guide: \u003ca href=\"\/pages\/which-railblaza-mount-do-i-need\"\u003eWhich Railblaza Mount Do I Need?\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"railblaza-bimini-rail-mount","title":"Bimini Rail Mount","description":"\u003cp\u003e\u003cstrong\u003eProduct code:\u003c\/strong\u003e 03-4165-11  |  \u003cstrong\u003eBrand:\u003c\/strong\u003e Genuine RAILBLAZA\u003c\/p\u003e\u003cp\u003eThe RAILBLAZA Bimini RailMount clamps onto your bimini frame to create a secure StarPort mounting point at bimini height – with no drilling. Combined with the \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e, it lets you position Birdboss above your bimini or boat cover, right where birds like to land, and lift it off in seconds when you head out.\u003c\/p\u003e\n\u003ch3\u003eSuitable Locations and Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBimini frames with round tube of 19, 22 or 25 mm\u003c\/li\u003e\n\u003cli\u003eBimini and canopy frames with square tube of 28 or 32 mm\u003c\/li\u003e\n\u003cli\u003eProtecting biminis, boat covers and canopies from birds while moored\u003c\/li\u003e\n\u003cli\u003eRemovable installations where drilling the frame is not desirable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow It Connects to Birdboss\u003c\/h3\u003e\n\u003cp\u003eThis mount has a built-in RAILBLAZA StarPort socket. Fit the \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e to your Birdboss, insert it into the StarPort and turn it until the locking slide clicks into place. To remove Birdboss, release the slide, turn and lift out – the mount stays in position, ready for next time.\u003c\/p\u003e\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cp\u003eTo mount Birdboss on this RAILBLAZA product you will need:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eA \u003ca href=\"\/products\/birdboss-base-kit\"\u003eBirdboss unit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis RAILBLAZA mount\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eEach item is sold separately unless specifically advertised as a package.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Bimini RailMount\u003c\/li\u003e\n\u003cli\u003e1 x StarPort\u003c\/li\u003e\n\u003cli\u003e8 x non-slip rubber inserts\u003c\/li\u003e\n\u003cli\u003e2 x M6 x 30 mm and 2 x M6 x 16 mm stainless-steel screws with nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e round tube 19, 22 or 25 mm; square tube 28 or 32 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-stabilised fibreglass-reinforced plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 190 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eAccepts the Birdboss BRAB and any RAILBLAZA StarPort accessory, such as navigation lights and camera mounts. The clamp is designed to avoid interfering with bimini fabric.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eSelect the rubber inserts to suit your tube, place the two halves of the mount around the frame and screw them together with the supplied stainless-steel hardware. Choose a position where the Birdboss arms will clear the bimini fabric and frame when they rotate.\u003c\/p\u003e\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:1em 0;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/IyebuWLXQQI\" title=\"RAILBLAZA Bimini RailMount\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;border:0;\" loading=\"lazy\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003ch3\u003eInstallation and Safety Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake sure the bimini frame is sound and firmly fixed before fitting Birdboss.\u003c\/li\u003e\n\u003cli\u003eTighten the screws evenly and do not overtighten, particularly on thin-walled bimini tube.\u003c\/li\u003e\n\u003cli\u003eRemove Birdboss when the boat is under way and in extreme winds (over 40 knots).\u003c\/li\u003e\n\u003cli\u003ePosition Birdboss so the arms can rotate freely, clear of rigging, antennas, canopies and people.\u003c\/li\u003e\n\u003cli\u003eAdjust the Birdboss arms evenly so the unit stays balanced.\u003c\/li\u003e\n\u003cli\u003eCheck the mount, StarPort lock and Birdboss fittings regularly, especially after rough weather.\u003c\/li\u003e\n\u003cli\u003eRinse the mount and BRAB with fresh water after exposure to salt spray.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRelated Links\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e – connects Birdboss to this mount\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/railblaza-mounting-options-for-birdboss\"\u003eAll Railblaza Mounting Options for Birdboss\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/which-railblaza-mount-do-i-need\"\u003eWhich Railblaza Mount Do I Need?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fixing-instructions\"\u003eBirdboss Fixing \u0026amp; Installation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RAILBLAZA","offers":[{"title":"Default Title","offer_id":50591070453977,"sku":"03-4165-11","price":47.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/3330\/1465\/files\/03-4165-11_Bimini-RailMount.png?v=1790914154"},{"product_id":"railblaza-pontoon-boat-railmount-28-32mm","title":"Pontoon Boat RailMount 28–32 mm","description":"\u003cp\u003e\u003cstrong\u003eProduct code:\u003c\/strong\u003e 03-4149-11  |  \u003cstrong\u003eBrand:\u003c\/strong\u003e Genuine RAILBLAZA\u003c\/p\u003e\u003cp\u003eThe RAILBLAZA Pontoon Boat RailMount turns a 28–32 mm rail into a secure StarPort mounting point without drilling a single hole. Add the \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e and Birdboss can be fitted to your pontoon boat railing while you’re away, then removed in seconds when you’re back on board.\u003c\/p\u003e\n\u003ch3\u003eSuitable Locations and Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePontoon boat (party barge) railings of 28 mm or 32 mm\u003c\/li\u003e\n\u003cli\u003eBoat, jetty or pontoon handrails within the same size range\u003c\/li\u003e\n\u003cli\u003eRemovable installations where drilling is not desirable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow It Connects to Birdboss\u003c\/h3\u003e\n\u003cp\u003eThis mount has a built-in RAILBLAZA StarPort socket. Fit the \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e to your Birdboss, insert it into the StarPort and turn it until the locking slide clicks into place. To remove Birdboss, release the slide, turn and lift out – the mount stays in position, ready for next time.\u003c\/p\u003e\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cp\u003eTo mount Birdboss on this RAILBLAZA product you will need:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eA \u003ca href=\"\/products\/birdboss-base-kit\"\u003eBirdboss unit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis RAILBLAZA mount\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eEach item is sold separately unless specifically advertised as a package.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Pontoon Boat RailMount\u003c\/li\u003e\n\u003cli\u003e1 x StarPort\u003c\/li\u003e\n\u003cli\u003e2 x non-slip rubber inserts\u003c\/li\u003e\n\u003cli\u003e2 x M6 x 30 mm and 2 x M6 x 16 mm stainless-steel screws with nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e 28 mm and 32 mm rails\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-stabilised fibreglass-reinforced plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 150 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eAccepts the Birdboss BRAB and any RAILBLAZA StarPort accessory. Rubber inserts help prevent the mount slipping on the rail.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eFit the rubber inserts, place the mount around the rail and screw the two halves together with the supplied stainless-steel hardware. The mount can be moved to a new position at any time.\u003c\/p\u003e\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:1em 0;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/EjA6uayHLIE\" title=\"RAILBLAZA Pontoon Boat RailMount\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;border:0;\" loading=\"lazy\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003ch3\u003eInstallation and Safety Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMeasure your rail before ordering – this mount suits 28 to 32 mm rails. For other sizes see the \u003ca href=\"\/collections\/railblaza-mounting-options-for-birdboss\"\u003eother RailMount options\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eTighten the screws evenly and do not overtighten.\u003c\/li\u003e\n\u003cli\u003eRemove Birdboss when the boat is under way and in extreme winds (over 40 knots).\u003c\/li\u003e\n\u003cli\u003ePosition Birdboss so the arms can rotate freely, clear of rigging, antennas, canopies and people.\u003c\/li\u003e\n\u003cli\u003eAdjust the Birdboss arms evenly so the unit stays balanced.\u003c\/li\u003e\n\u003cli\u003eCheck the mount, StarPort lock and Birdboss fittings regularly, especially after rough weather.\u003c\/li\u003e\n\u003cli\u003eRinse the mount and BRAB with fresh water after exposure to salt spray.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRelated Links\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e – connects Birdboss to this mount\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/railblaza-mounting-options-for-birdboss\"\u003eAll Railblaza Mounting Options for Birdboss\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/which-railblaza-mount-do-i-need\"\u003eWhich Railblaza Mount Do I Need?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fixing-instructions\"\u003eBirdboss Fixing \u0026amp; Installation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RAILBLAZA","offers":[{"title":"Default Title","offer_id":50591070617817,"sku":"03-4149-11","price":45.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/3330\/1465\/files\/03-4149-11-Pontoon-Boat-RailMount-28-32-Black-NB.png?v=1790914156"},{"product_id":"railblaza-starport-adaptor-pair-black","title":"StarPort Adaptor Pair – Black","description":"\u003cp\u003e\u003cstrong\u003eProduct code:\u003c\/strong\u003e 02-4043-11  |  \u003cstrong\u003eBrand:\u003c\/strong\u003e Genuine RAILBLAZA\u003c\/p\u003e\u003cp\u003eA pair of genuine RAILBLAZA StarPort Adaptors with washers and stainless-steel hardware. Screw or bolt an adaptor to the underside of a fitting and it becomes StarPort compatible – able to click into any RAILBLAZA StarPort mount, rotate through 360° and be removed in seconds.\u003c\/p\u003e\n\u003ch3\u003eSuitable Locations and Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaking lights, cameras, small equipment or custom fittings StarPort compatible\u003c\/li\u003e\n\u003cli\u003eCustomers building a RAILBLAZA-based system across several mounting points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow It Connects to Birdboss\u003c\/h3\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e already incorporates a genuine StarPort Adaptor, so most Birdboss customers will not need this pair. It is useful if you want to make other equipment StarPort compatible so it can share your mounts with Birdboss. Please \u003ca href=\"\/pages\/contact-1\"\u003econtact us\u003c\/a\u003e before adapting any Birdboss components yourself.\u003c\/p\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA RAILBLAZA StarPort mount (sold separately) – see \u003ca href=\"\/collections\/railblaza-mounting-options-for-birdboss\"\u003eRailblaza Mounting Options\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x StarPort Adaptors\u003c\/li\u003e\n\u003cli\u003e2 x adaptor washers\u003c\/li\u003e\n\u003cli\u003eStainless-steel hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-stabilised fibreglass-reinforced plastic, stainless-steel hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 64 g (pair)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eFits all RAILBLAZA StarPort mounts, including the StarPort, StarPort HD, RailMounts, Bimini RailMount, Pontoon Boat RailMount, QuikPort, RIBPort and Titan Grip Suction Mount.\u003c\/p\u003e\n\u003ch3\u003eInstallation and Safety Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake sure the item you are adapting is suitable for the load and conditions it will be exposed to.\u003c\/li\u003e\n\u003cli\u003eUse the supplied stainless-steel hardware and do not overtighten.\u003c\/li\u003e\n\u003cli\u003eRinse with fresh water after exposure to salt spray.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRelated Links\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e – connects Birdboss to this mount\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/railblaza-mounting-options-for-birdboss\"\u003eAll Railblaza Mounting Options for Birdboss\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/which-railblaza-mount-do-i-need\"\u003eWhich Railblaza Mount Do I Need?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fixing-instructions\"\u003eBirdboss Fixing \u0026amp; Installation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RAILBLAZA","offers":[{"title":"Default Title","offer_id":50591070847193,"sku":"02-4043-11","price":17.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/3330\/1465\/files\/02-4043-11-Attachment-Adaptor-NB.png?v=1790914157"},{"product_id":"railblaza-clevis-bimini-support-pair-black","title":"Clevis\/Bimini Support Pair – Black","description":"\u003cp\u003e\u003cstrong\u003eProduct code:\u003c\/strong\u003e 03-4032-11  |  \u003cstrong\u003eBrand:\u003c\/strong\u003e Genuine RAILBLAZA\u003c\/p\u003e\u003cp\u003eThe RAILBLAZA Clevis\/Bimini Support Pair gives your bimini struts a quick-release attachment point. Each clevis clicks into a RAILBLAZA StarPort mount, so the bimini can be connected or removed in moments without fighting corroded pins and fittings.\u003c\/p\u003e\n\u003ch3\u003eSuitable Locations and Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBimini struts and support legs on boats fitted with StarPort mounts\u003c\/li\u003e\n\u003cli\u003eBoats where the bimini is regularly removed for fishing or casting room\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow It Connects to Birdboss\u003c\/h3\u003e\n\u003cp\u003eThe clevis does not hold Birdboss itself – it lets one StarPort mount do two jobs. Use the StarPort to support your bimini while you’re on the water, then stow the bimini, remove the clevis and click Birdboss in using the \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e before you leave the boat.\u003c\/p\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA RAILBLAZA StarPort mount for each clevis (sold separately)\u003c\/li\u003e\n\u003cli\u003eTo use the same mount for Birdboss: a \u003ca href=\"\/products\/birdboss-base-kit\"\u003eBirdboss unit\u003c\/a\u003e and \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBRAB\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Clevis\/Bimini Supports\u003c\/li\u003e\n\u003cli\u003eStainless-steel hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-stabilised fibreglass-reinforced plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 77 g (pair)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eClicks into any RAILBLAZA StarPort mount, including the StarPort, StarPort HD and RailMount range.\u003c\/p\u003e\n\u003ch3\u003eInstallation and Safety Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAttach the clevis to the bimini strut with the supplied stainless-steel hardware, then click it into the StarPort and turn to lock.\u003c\/li\u003e\n\u003cli\u003eCheck that the bimini is secure before getting under way.\u003c\/li\u003e\n\u003cli\u003eRinse with fresh water after exposure to salt spray.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRelated Links\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e – connects Birdboss to this mount\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/railblaza-mounting-options-for-birdboss\"\u003eAll Railblaza Mounting Options for Birdboss\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/which-railblaza-mount-do-i-need\"\u003eWhich Railblaza Mount Do I Need?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fixing-instructions\"\u003eBirdboss Fixing \u0026amp; Installation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RAILBLAZA","offers":[{"title":"Default Title","offer_id":50591070912729,"sku":"03-4032-11","price":26.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/3330\/1465\/files\/02-4032-11_600-1.jpg?v=1790914157"},{"product_id":"railblaza-quikport-with-vhb-black","title":"QuikPort with VHB – Black","description":"\u003cp\u003e\u003cstrong\u003eProduct code:\u003c\/strong\u003e 03-4087-11  |  \u003cstrong\u003eBrand:\u003c\/strong\u003e Genuine RAILBLAZA\u003c\/p\u003e\u003cp\u003eThe RAILBLAZA QuikPort is a compact, low-profile StarPort mount that sticks in place with a 3M VHB self-adhesive pad – no drilling and no tools. It suits smooth, flat surfaces including PVC, fibreglass and polyethylene.\u003c\/p\u003e\n\u003ch3\u003eSuitable Locations and Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlat horizontal or vertical surfaces where drilling is not desirable\u003c\/li\u003e\n\u003cli\u003eInflatable boats, tenders, kayaks and SUPs\u003c\/li\u003e\n\u003cli\u003eSheltered positions and lighter-duty installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow It Connects to Birdboss\u003c\/h3\u003e\n\u003cp\u003eThis mount has a built-in RAILBLAZA StarPort socket. Fit the \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e to your Birdboss, insert it into the StarPort and turn it until the locking slide clicks into place. To remove Birdboss, release the slide, turn and lift out – the mount stays in position, ready for next time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e RAILBLAZA designs the QuikPort for lighter-duty accessories. For exposed positions or a fully extended Birdboss, we recommend the larger \u003ca href=\"\/products\/railblaza-ribport-starport-3m-vhb-grey\"\u003eRIBPort\u003c\/a\u003e or a screw-fixed \u003ca href=\"\/products\/railblaza-starport-black\"\u003eStarPort\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cp\u003eTo mount Birdboss on this RAILBLAZA product you will need:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eA \u003ca href=\"\/products\/birdboss-base-kit\"\u003eBirdboss unit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis RAILBLAZA mount\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eEach item is sold separately unless specifically advertised as a package.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x QuikPort with 3M VHB self-adhesive pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing:\u003c\/strong\u003e 3M VHB self-adhesive pad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-stabilised fibreglass-reinforced plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 118 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eAccepts the Birdboss BRAB and any RAILBLAZA StarPort accessory. Replacement VHB pads are available from RAILBLAZA stockists.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eChoose a flat, smooth position. Clean the surface thoroughly with isopropyl alcohol and let it dry, peel the backing from the pad and press the QuikPort firmly into place.\u003c\/p\u003e\u003ch3\u003eInstallation and Safety Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllow the 3M VHB adhesive to reach full bond strength (up to 72 hours) before fitting Birdboss.\u003c\/li\u003e\n\u003cli\u003eApply only to clean, dry, smooth surfaces – not to textured non-skid, flaking paint or fabric.\u003c\/li\u003e\n\u003cli\u003eRemove Birdboss when the boat is under way and in extreme winds (over 40 knots).\u003c\/li\u003e\n\u003cli\u003ePosition Birdboss so the arms can rotate freely, clear of rigging, antennas, canopies and people.\u003c\/li\u003e\n\u003cli\u003eAdjust the Birdboss arms evenly so the unit stays balanced.\u003c\/li\u003e\n\u003cli\u003eCheck the mount, StarPort lock and Birdboss fittings regularly, especially after rough weather.\u003c\/li\u003e\n\u003cli\u003eRinse the mount and BRAB with fresh water after exposure to salt spray.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRelated Links\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e – connects Birdboss to this mount\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/railblaza-mounting-options-for-birdboss\"\u003eAll Railblaza Mounting Options for Birdboss\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/which-railblaza-mount-do-i-need\"\u003eWhich Railblaza Mount Do I Need?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fixing-instructions\"\u003eBirdboss Fixing \u0026amp; Installation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RAILBLAZA","offers":[{"title":"Default Title","offer_id":50591071895769,"sku":"03-4087-11","price":33.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/3330\/1465\/files\/03-4087-11_20QuikPort_20Black_2003-4087-21_20QuikPort_20White-NB_20copy.png?v=1790914159"},{"product_id":"railblaza-starport-black","title":"StarPort – Black","description":"\u003cp\u003e\u003cstrong\u003eProduct code:\u003c\/strong\u003e 03-4015-11  |  \u003cstrong\u003eBrand:\u003c\/strong\u003e Genuine RAILBLAZA\u003c\/p\u003e\u003cp\u003eThe RAILBLAZA StarPort is a compact, permanent mounting point that can be surface mounted on a deck or flush mounted into a panel. Once installed, it gives you a secure, low-profile socket for Birdboss using the \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e – and a cap and gasket to keep it clean and watertight when Birdboss is removed.\u003c\/p\u003e\n\u003ch3\u003eSuitable Locations and Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlat horizontal or vertical surfaces: decks, cabin tops, gunwales and transoms\u003c\/li\u003e\n\u003cli\u003eJetty and pontoon decking\u003c\/li\u003e\n\u003cli\u003ePermanent installations where you want a clean, low-profile mounting point\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow It Connects to Birdboss\u003c\/h3\u003e\n\u003cp\u003eThis mount has a built-in RAILBLAZA StarPort socket. Fit the \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e to your Birdboss, insert it into the StarPort and turn it until the locking slide clicks into place. To remove Birdboss, release the slide, turn and lift out – the mount stays in position, ready for next time.\u003c\/p\u003e\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cp\u003eTo mount Birdboss on this RAILBLAZA product you will need:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eA \u003ca href=\"\/products\/birdboss-base-kit\"\u003eBirdboss unit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis RAILBLAZA mount\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eEach item is sold separately unless specifically advertised as a package.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x StarPort assembly with cap and gasket\u003c\/li\u003e\n\u003cli\u003eStainless-steel hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e surface (deck) or flush mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-stabilised fibreglass-reinforced plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 95 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eAccepts the Birdboss BRAB and any RAILBLAZA StarPort accessory, so the same mount can also hold rod holders, lights and other RAILBLAZA gear.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eMark the position, drill and fix the StarPort with the supplied stainless-steel hardware, or cut out the panel for a flush installation. On fibreglass, follow the surface preparation steps in our \u003ca href=\"\/pages\/fixing-instructions\"\u003eFixing \u0026amp; Installation Guide\u003c\/a\u003e (masking tape, pilot hole, countersink and sealant).\u003c\/p\u003e\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:1em 0;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/sbALZXiPJfc\" title=\"RAILBLAZA StarPort\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;border:0;\" loading=\"lazy\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003ch3\u003eInstallation and Safety Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCheck for wiring, fuel lines and structure behind the panel before drilling.\u003c\/li\u003e\n\u003cli\u003eSeal all fixings on boats to prevent water entering the core.\u003c\/li\u003e\n\u003cli\u003eRemove Birdboss when the boat is under way and in extreme winds (over 40 knots).\u003c\/li\u003e\n\u003cli\u003ePosition Birdboss so the arms can rotate freely, clear of rigging, antennas, canopies and people.\u003c\/li\u003e\n\u003cli\u003eAdjust the Birdboss arms evenly so the unit stays balanced.\u003c\/li\u003e\n\u003cli\u003eCheck the mount, StarPort lock and Birdboss fittings regularly, especially after rough weather.\u003c\/li\u003e\n\u003cli\u003eRinse the mount and BRAB with fresh water after exposure to salt spray.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRelated Links\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e – connects Birdboss to this mount\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/railblaza-mounting-options-for-birdboss\"\u003eAll Railblaza Mounting Options for Birdboss\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/which-railblaza-mount-do-i-need\"\u003eWhich Railblaza Mount Do I Need?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fixing-instructions\"\u003eBirdboss Fixing \u0026amp; Installation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RAILBLAZA","offers":[{"title":"Default Title","offer_id":50591072583897,"sku":"03-4015-11","price":21.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/3330\/1465\/files\/03-4015_StarPort_black-scaled.jpg?v=1790914160"},{"product_id":"railblaza-starport-hd-black","title":"StarPort HD – Black","description":"\u003cp\u003e\u003cstrong\u003eProduct code:\u003c\/strong\u003e 03-4046-11  |  \u003cstrong\u003eBrand:\u003c\/strong\u003e Genuine RAILBLAZA\u003c\/p\u003e\u003cp\u003eThe RAILBLAZA StarPort HD is a heavy-duty StarPort with a rectangular four-point base. Its hole patterns line up with many existing Scotty, RAM and Cannon mount bases, so it can often replace an old base using the same holes – no new drilling required.\u003c\/p\u003e\n\u003ch3\u003eSuitable Locations and Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlat horizontal or vertical surfaces on boats, kayaks and pontoons\u003c\/li\u003e\n\u003cli\u003eReplacing existing Scotty, RAM, Cannon or Fish-On style bases\u003c\/li\u003e\n\u003cli\u003ePermanent installations that need a strong four-point fixing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow It Connects to Birdboss\u003c\/h3\u003e\n\u003cp\u003eThis mount has a built-in RAILBLAZA StarPort socket. Fit the \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e to your Birdboss, insert it into the StarPort and turn it until the locking slide clicks into place. To remove Birdboss, release the slide, turn and lift out – the mount stays in position, ready for next time.\u003c\/p\u003e\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cp\u003eTo mount Birdboss on this RAILBLAZA product you will need:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eA \u003ca href=\"\/products\/birdboss-base-kit\"\u003eBirdboss unit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis RAILBLAZA mount\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eEach item is sold separately unless specifically advertised as a package.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x StarPort HD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase:\u003c\/strong\u003e rectangular, four-point fixing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-stabilised glass-filled nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 82 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eAccepts the Birdboss BRAB and any RAILBLAZA StarPort accessory.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eFix through all four holes using stainless-steel bolts with locknuts or rivets suited to your surface. Self-tapping screws are not recommended for high-load applications.\u003c\/p\u003e\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:1em 0;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/AKOSBIUHVWk\" title=\"RAILBLAZA StarPort HD\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;border:0;\" loading=\"lazy\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003ch3\u003eInstallation and Safety Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse all four fixing points and seal fixings on boats to keep water out.\u003c\/li\u003e\n\u003cli\u003eRemove Birdboss when the boat is under way and in extreme winds (over 40 knots).\u003c\/li\u003e\n\u003cli\u003ePosition Birdboss so the arms can rotate freely, clear of rigging, antennas, canopies and people.\u003c\/li\u003e\n\u003cli\u003eAdjust the Birdboss arms evenly so the unit stays balanced.\u003c\/li\u003e\n\u003cli\u003eCheck the mount, StarPort lock and Birdboss fittings regularly, especially after rough weather.\u003c\/li\u003e\n\u003cli\u003eRinse the mount and BRAB with fresh water after exposure to salt spray.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRelated Links\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e – connects Birdboss to this mount\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/railblaza-mounting-options-for-birdboss\"\u003eAll Railblaza Mounting Options for Birdboss\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/which-railblaza-mount-do-i-need\"\u003eWhich Railblaza Mount Do I Need?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fixing-instructions\"\u003eBirdboss Fixing \u0026amp; Installation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RAILBLAZA","offers":[{"title":"Default Title","offer_id":50591072616665,"sku":"03-4046-11","price":22.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/3330\/1465\/files\/03-4046-11-Starport-HD-NB.png?v=1790914162"},{"product_id":"railblaza-ribport-starport-3m-vhb-grey","title":"RIBPort including StarPort and 3M VHB – Grey","description":"\u003cp\u003e\u003cstrong\u003eProduct code:\u003c\/strong\u003e 03-4064-11  |  \u003cstrong\u003eBrand:\u003c\/strong\u003e Genuine RAILBLAZA\u003c\/p\u003e\n\u003cp\u003eThe RAILBLAZA RIBPort gives inflatable boats, RIBs and other smooth surfaces a secure StarPort mounting point without cutting or drilling. Its large 115 x 150 mm base is bonded in place with a 3M VHB adhesive pad, spreading the load across the surface – ideal for fitting Birdboss to a tender or RIB with the \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSuitable Locations and Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInflatable boats, RIBs and tenders\u003c\/li\u003e\n\u003cli\u003eSUPs, kayaks and coolers\u003c\/li\u003e\n\u003cli\u003eFlat or gently curved smooth surfaces where drilling is not desirable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow It Connects to Birdboss\u003c\/h3\u003e\n\u003cp\u003eThis mount has a built-in RAILBLAZA StarPort socket. Fit the \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e to your Birdboss, insert it into the StarPort and turn it until the locking slide clicks into place. To remove Birdboss, release the slide, turn and lift out – the mount stays in position, ready for next time.\u003c\/p\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cp\u003eTo mount Birdboss on this RAILBLAZA product you will need:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eA \u003ca href=\"\/products\/birdboss-base-kit\"\u003eBirdboss unit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis RAILBLAZA mount\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eEach item is sold separately unless specifically advertised as a package.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x RIBPort base with StarPort\u003c\/li\u003e\n\u003cli\u003e1 x 3M VHB adhesive pad\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase size:\u003c\/strong\u003e approx. 115 x 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-stabilised AES and non-leaching PVC plastic, stainless-steel fasteners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 190 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eAccepts the Birdboss BRAB and any RAILBLAZA StarPort accessory. Please contact us before fitting to Hypalon\/CSM or other specialist inflatable fabrics.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eClean the surface thoroughly with isopropyl alcohol and let it dry. Peel the backing from the 3M VHB pad, position the RIBPort and press firmly over the whole base.\u003c\/p\u003e\n\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; margin: 1em 0;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/X1wot3VEv2c\" title=\"RAILBLAZA RIBPort\" style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; border: 0;\" loading=\"lazy\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eInstallation and Safety Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllow the 3M VHB adhesive to reach full bond strength (up to 72 hours) before fitting Birdboss.\u003c\/li\u003e\n\u003cli\u003eInflate inflatable tubes to normal working pressure before fitting.\u003c\/li\u003e\n\u003cli\u003eRemove Birdboss when the boat is under way and in extreme winds (over 40 knots).\u003c\/li\u003e\n\u003cli\u003ePosition Birdboss so the arms can rotate freely, clear of rigging, antennas, canopies and people.\u003c\/li\u003e\n\u003cli\u003eAdjust the Birdboss arms evenly so the unit stays balanced.\u003c\/li\u003e\n\u003cli\u003eCheck the mount, StarPort lock and Birdboss fittings regularly, especially after rough weather.\u003c\/li\u003e\n\u003cli\u003eRinse the mount and BRAB with fresh water after exposure to salt spray.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated Links\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e – connects Birdboss to this mount\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/railblaza-mounting-options-for-birdboss\"\u003eAll Railblaza Mounting Options for Birdboss\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/which-railblaza-mount-do-i-need\"\u003eWhich Railblaza Mount Do I Need?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fixing-instructions\"\u003eBirdboss Fixing \u0026amp; Installation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RAILBLAZA","offers":[{"title":"Default Title","offer_id":50591072878809,"sku":"03-4064-11","price":52.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/3330\/1465\/files\/03-4064-11_20RIBPort_20Black_2003-4064-21_20RIBPort_20White_2003-4064-51_20RIBPort_20Grey-NB.png?v=1790914163"},{"product_id":"railblaza-railmount-19-25mm","title":"RailMount 19–25 mm","description":"\u003cp\u003e\u003cstrong\u003eProduct code:\u003c\/strong\u003e 03-4011-11  |  \u003cstrong\u003eBrand:\u003c\/strong\u003e Genuine RAILBLAZA\u003c\/p\u003e\u003cp\u003eThe RAILBLAZA RailMount 19–25 clamps onto smaller round or square rails and gives you a removable StarPort mounting point with no drilling. With the \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e, Birdboss can be fitted to your boat rail when you leave and removed in seconds when you return.\u003c\/p\u003e\n\u003ch3\u003eSuitable Locations and Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoat rails, bow and stern rails of 19–25 mm\u003c\/li\u003e\n\u003cli\u003eGrab rails, bimini and canopy frames in the same size range\u003c\/li\u003e\n\u003cli\u003eRemovable installations where drilling is not desirable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow It Connects to Birdboss\u003c\/h3\u003e\n\u003cp\u003eThis mount has a built-in RAILBLAZA StarPort socket. Fit the \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e to your Birdboss, insert it into the StarPort and turn it until the locking slide clicks into place. To remove Birdboss, release the slide, turn and lift out – the mount stays in position, ready for next time.\u003c\/p\u003e\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cp\u003eTo mount Birdboss on this RAILBLAZA product you will need:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eA \u003ca href=\"\/products\/birdboss-base-kit\"\u003eBirdboss unit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis RAILBLAZA mount\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eEach item is sold separately unless specifically advertised as a package.\u003c\/p\u003e\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x RailMount 19–25 with StarPort\u003c\/li\u003e\n\u003cli\u003eAdaptors, rubber grips and self-adhesive grip tape\u003c\/li\u003e\n\u003cli\u003eStainless-steel hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e round or square rails 19–25 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-stabilised fibreglass-reinforced plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 130 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eAccepts the Birdboss BRAB and any RAILBLAZA StarPort accessory. For 32–41 mm rails see the \u003ca href=\"\/products\/railblaza-railmount-32-41mm\"\u003eRailMount 32–41 mm\u003c\/a\u003e, or compare with the Birdboss \u003ca href=\"\/products\/rail-clamp-25mm-black\"\u003e25 mm Rail Clamp\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eFit the adaptors and rubber grips to suit your rail, place the mount around the rail and tighten the supplied stainless-steel hardware evenly.\u003c\/p\u003e\u003cdiv style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden;margin:1em 0;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/FeI6tW_Co5I\" title=\"RAILBLAZA RailMount\" style=\"position:absolute;top:0;left:0;width:100%;height:100%;border:0;\" loading=\"lazy\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003ch3\u003eInstallation and Safety Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMeasure your rail before ordering – this mount suits 19 to 25 mm rails.\u003c\/li\u003e\n\u003cli\u003eTighten evenly and do not overtighten.\u003c\/li\u003e\n\u003cli\u003eRemove Birdboss when the boat is under way and in extreme winds (over 40 knots).\u003c\/li\u003e\n\u003cli\u003ePosition Birdboss so the arms can rotate freely, clear of rigging, antennas, canopies and people.\u003c\/li\u003e\n\u003cli\u003eAdjust the Birdboss arms evenly so the unit stays balanced.\u003c\/li\u003e\n\u003cli\u003eCheck the mount, StarPort lock and Birdboss fittings regularly, especially after rough weather.\u003c\/li\u003e\n\u003cli\u003eRinse the mount and BRAB with fresh water after exposure to salt spray.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRelated Links\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e – connects Birdboss to this mount\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/railblaza-mounting-options-for-birdboss\"\u003eAll Railblaza Mounting Options for Birdboss\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/which-railblaza-mount-do-i-need\"\u003eWhich Railblaza Mount Do I Need?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fixing-instructions\"\u003eBirdboss Fixing \u0026amp; Installation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RAILBLAZA","offers":[{"title":"Default Title","offer_id":50591073009881,"sku":"03-4011-11","price":44.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/3330\/1465\/files\/03-4011-11_20RailMount_2019-25_20Black_2003-4011-21_20RailMount_2019-25_20White-NB.png?v=1790914164"},{"product_id":"railblaza-railmount-32-41mm","title":"RailMount 32–41 mm","description":"\u003cp\u003e\u003cstrong\u003eProduct code:\u003c\/strong\u003e 03-4013-11  |  \u003cstrong\u003eBrand:\u003c\/strong\u003e Genuine RAILBLAZA\u003c\/p\u003e\n\u003cp\u003eThe RAILBLAZA RailMount 32–41 clamps onto larger rails and creates a removable StarPort mounting point without drilling. With the \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e, it’s a quick way to fit Birdboss to bow rails, console rails and other larger tube.\u003c\/p\u003e\n\u003ch3\u003eSuitable Locations and Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRound or square rails of 32 mm, and round rails up to 41 mm\u003c\/li\u003e\n\u003cli\u003eBow rails, centre console rails, T-top frames and larger handrails\u003c\/li\u003e\n\u003cli\u003eRemovable installations where drilling is not desirable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow It Connects to Birdboss\u003c\/h3\u003e\n\u003cp\u003eThis mount has a built-in RAILBLAZA StarPort socket. Fit the \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e to your Birdboss, insert it into the StarPort and turn it until the locking slide clicks into place. To remove Birdboss, release the slide, turn and lift out – the mount stays in position, ready for next time.\u003c\/p\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cp\u003eTo mount Birdboss on this RAILBLAZA product you will need:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eA \u003ca href=\"\/products\/birdboss-base-kit\"\u003eBirdboss unit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis RAILBLAZA mount\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eEach item is sold separately unless specifically advertised as a package.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x RailMount 32–41 with StarPort\u003c\/li\u003e\n\u003cli\u003e1 x weather-tight gasket and cover\u003c\/li\u003e\n\u003cli\u003e2 x non-slip rubber inserts and 2 x Hobie H-Rail rubber inserts\u003c\/li\u003e\n\u003cli\u003e4 x spacers\u003c\/li\u003e\n\u003cli\u003eStainless-steel hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e round or square 32 mm rails; round rails up to 41 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-stabilised fibreglass-reinforced plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 180 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eAccepts the Birdboss BRAB and any RAILBLAZA StarPort accessory. For 19–25 mm rails see the \u003ca href=\"\/products\/railblaza-railmount-19-25mm\"\u003eRailMount 19–25 mm\u003c\/a\u003e, or compare with the Birdboss \u003ca href=\"\/products\/rail-clamp-34mm-black\"\u003e34 mm\u003c\/a\u003e and \u003ca href=\"\/products\/rail-clamp-50mm-black\"\u003e50 mm Rail Clamps\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eChoose the inserts and spacers to suit your rail, place the mount around the rail and tighten the supplied stainless-steel hardware evenly.\u003c\/p\u003e\n\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; margin: 1em 0;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/FeI6tW_Co5I\" title=\"RAILBLAZA RailMount\" style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; border: 0;\" loading=\"lazy\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eInstallation and Safety Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMeasure your rail before ordering – this mount suits 32 to 41 mm rails.\u003c\/li\u003e\n\u003cli\u003eTighten evenly and do not overtighten.\u003c\/li\u003e\n\u003cli\u003eRemove Birdboss when the boat is under way and in extreme winds (over 40 knots).\u003c\/li\u003e\n\u003cli\u003ePosition Birdboss so the arms can rotate freely, clear of rigging, antennas, canopies and people.\u003c\/li\u003e\n\u003cli\u003eAdjust the Birdboss arms evenly so the unit stays balanced.\u003c\/li\u003e\n\u003cli\u003eCheck the mount, StarPort lock and Birdboss fittings regularly, especially after rough weather.\u003c\/li\u003e\n\u003cli\u003eRinse the mount and BRAB with fresh water after exposure to salt spray.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated Links\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e – connects Birdboss to this mount\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/railblaza-mounting-options-for-birdboss\"\u003eAll Railblaza Mounting Options for Birdboss\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/which-railblaza-mount-do-i-need\"\u003eWhich Railblaza Mount Do I Need?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fixing-instructions\"\u003eBirdboss Fixing \u0026amp; Installation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RAILBLAZA","offers":[{"title":"Default Title","offer_id":50591073108185,"sku":"03-4013-11","price":47.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/3330\/1465\/files\/03-4013-11_20RailMount_2032-41_20Black_2003-4013-21_20RailMount_2032-41_20White-NB.png?v=1790914165"},{"product_id":"railblaza-titan-grip-suction-mount","title":"Titan Grip Suction Mount","description":"\u003cp\u003e\u003cstrong\u003eProduct code:\u003c\/strong\u003e 03-4233-11  |  \u003cstrong\u003eBrand:\u003c\/strong\u003e Genuine RAILBLAZA\u003c\/p\u003e\n\u003cp\u003eThe RAILBLAZA Titan Grip is a heavy-duty locking suction mount with a built-in StarPort. It fixes to smooth, non-porous surfaces in seconds without tools and lifts off cleanly with no marks or holes – a convenient temporary mounting option for Birdboss with the \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eSuitable Locations and Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSmooth, flat, non-porous surfaces such as gelcoat, glass and smooth painted panels\u003c\/li\u003e\n\u003cli\u003eTemporary installations and short-term use\u003c\/li\u003e\n\u003cli\u003eHire boats or vessels where drilling is not permitted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow It Connects to Birdboss\u003c\/h3\u003e\n\u003cp\u003eThis mount has a built-in RAILBLAZA StarPort socket. Fit the \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e to your Birdboss, insert it into the StarPort and turn it until the locking slide clicks into place. To remove Birdboss, release the slide, turn and lift out – the mount stays in position, ready for next time.\u003c\/p\u003e\n\u003ch3\u003eAdditional Parts Required\u003c\/h3\u003e\n\u003cp\u003eTo mount Birdboss on this RAILBLAZA product you will need:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eA \u003ca href=\"\/products\/birdboss-base-kit\"\u003eBirdboss unit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe \u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis RAILBLAZA mount\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eEach item is sold separately unless specifically advertised as a package.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Titan Grip Suction Mount with integrated StarPort\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction cup diameter:\u003c\/strong\u003e approx. 95 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-stabilised fibreglass-reinforced engineered polymers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approx. 155 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eAccepts the Birdboss BRAB and any RAILBLAZA StarPort accessory.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eClean and dry both the surface and the suction cup, press the mount flat onto the surface and engage the locking lever.\u003c\/p\u003e\n\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; margin: 1em 0;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/kzP90gZbah4\" title=\"RAILBLAZA Titan Grip Suction Mount\" style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; border: 0;\" loading=\"lazy\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch3\u003eInstallation and Safety Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSuction mounts are best suited to temporary installations. Check the seal before leaving the boat and re-seat it regularly. For long-term unattended use, choose a fixed or clamp-on mount.\u003c\/li\u003e\n\u003cli\u003eDo not use on textured non-skid, porous or uneven surfaces.\u003c\/li\u003e\n\u003cli\u003eRemove Birdboss when the boat is under way and in extreme winds (over 40 knots).\u003c\/li\u003e\n\u003cli\u003ePosition Birdboss so the arms can rotate freely, clear of rigging, antennas, canopies and people.\u003c\/li\u003e\n\u003cli\u003eAdjust the Birdboss arms evenly so the unit stays balanced.\u003c\/li\u003e\n\u003cli\u003eCheck the mount, StarPort lock and Birdboss fittings regularly, especially after rough weather.\u003c\/li\u003e\n\u003cli\u003eRinse the mount and BRAB with fresh water after exposure to salt spray.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated Links\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/birdboss-railblaza-starport-adaptor-base-brab\"\u003eBirdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/a\u003e – connects Birdboss to this mount\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/railblaza-mounting-options-for-birdboss\"\u003eAll Railblaza Mounting Options for Birdboss\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/which-railblaza-mount-do-i-need\"\u003eWhich Railblaza Mount Do I Need?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fixing-instructions\"\u003eBirdboss Fixing \u0026amp; Installation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RAILBLAZA","offers":[{"title":"Default Title","offer_id":50591073435865,"sku":"03-4233-11","price":51.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/3330\/1465\/files\/03-4233-11-Titan-Grip-4.png?v=1790914169"},{"product_id":"birdboss-railblaza-starport-adaptor-base-brab","title":"Birdboss RAILBLAZA StarPort Adaptor Base","description":"\u003cp\u003e\u003cstrong\u003eProduct code:\u003c\/strong\u003e BRAB\u003c\/p\u003e\n\u003cp\u003eThe Birdboss RAILBLAZA StarPort Adaptor Base (BRAB) connects your Birdboss to the RAILBLAZA StarPort mounting system. It incorporates a genuine RAILBLAZA StarPort Adaptor, so Birdboss can click into any compatible RAILBLAZA mount – on rails, biminis, pontoons, inflatable boats, RIBs and flat surfaces – and be removed again in seconds.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConnects Birdboss to compatible RAILBLAZA mounts\u003c\/li\u003e\n\u003cli\u003eAllows Birdboss to be installed and removed quickly\u003c\/li\u003e\n\u003cli\u003eIncorporates a genuine RAILBLAZA StarPort Adaptor\u003c\/li\u003e\n\u003cli\u003eNo drilling or modification to your Birdboss Base Kit required\u003c\/li\u003e\n\u003cli\u003eOpens up more installation options for boats, pontoons, rails, biminis and inflatables\u003c\/li\u003e\n\u003cli\u003eWhen Birdboss is removed, the RAILBLAZA mount can be used for other compatible accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5 mm aluminium adaptor plate with two stainless-steel threaded studs\u003c\/li\u003e\n\u003cli\u003eGenuine RAILBLAZA StarPort Adaptor, fitted beneath the plate with countersunk stainless-steel screws\u003c\/li\u003e\n\u003cli\u003eStainless-steel Nyloc nuts to secure the Birdboss base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 70 x 40 x 44 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e 5 mm aluminium adaptor plate, stainless-steel mounting hardware, genuine RAILBLAZA StarPort Adaptor, UV-stabilised marine-grade polymer components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat You Need\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eA \u003ca href=\"\/products\/birdboss-base-kit\"\u003eBirdboss unit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis Birdboss RAILBLAZA StarPort Adaptor Base (BRAB)\u003c\/li\u003e\n\u003cli\u003eA compatible RAILBLAZA mount to suit your boat or installation (see below)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e the Birdboss unit and the RAILBLAZA mount are sold separately unless specifically advertised as a package. You will need to select the right RAILBLAZA mount for your boat or installation – our \u003ca href=\"\/pages\/which-railblaza-mount-do-i-need\"\u003eWhich Railblaza Mount Do I Need?\u003c\/a\u003e guide will help.\u003c\/p\u003e\n\u003ch3\u003eCompatible RAILBLAZA Mounts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/railblaza-bimini-rail-mount\"\u003eBimini Rail Mount\u003c\/a\u003e – bimini frames (round 19–25 mm, square 28–32 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/railblaza-pontoon-boat-railmount-28-32mm\"\u003ePontoon Boat RailMount 28–32 mm\u003c\/a\u003e – 28–32 mm pontoon boat rails\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/railblaza-railmount-19-25mm\"\u003eRailMount 19–25 mm\u003c\/a\u003e – 19–25 mm boat rails\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/railblaza-railmount-32-41mm\"\u003eRailMount 32–41 mm\u003c\/a\u003e – 32–41 mm boat rails\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/railblaza-starport-black\"\u003eStarPort – Black\u003c\/a\u003e – permanent deck or flush mounting on flat surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/railblaza-starport-hd-black\"\u003eStarPort HD – Black\u003c\/a\u003e – heavy-duty four-point mounting, replaces many existing bases\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/railblaza-ribport-starport-3m-vhb-grey\"\u003eRIBPort including StarPort and 3M VHB – Grey\u003c\/a\u003e – inflatable boats and RIBs, no drilling\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/railblaza-quikport-with-vhb-black\"\u003eQuikPort with VHB – Black\u003c\/a\u003e – small adhesive mount for flat surfaces, no drilling\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/railblaza-titan-grip-suction-mount\"\u003eTitan Grip Suction Mount\u003c\/a\u003e – temporary mounting on smooth surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow It Connects to Birdboss\u003c\/h3\u003e\n\u003cp\u003eThe Birdboss pivot base fits over the two stainless-steel threaded studs on top of the aluminium adaptor plate and is secured with the supplied stainless-steel Nyloc nuts. The genuine RAILBLAZA StarPort Adaptor is fastened beneath the plate with two countersunk stainless-steel screws and locks directly into compatible RAILBLAZA StarPort mounts.\u003c\/p\u003e\n\u003cp\u003eOnce assembled, the complete Birdboss clicks into your chosen RAILBLAZA mount and can be removed in seconds. The RAILBLAZA mount stays on the boat, ready for next time.\u003c\/p\u003e\u003ch3\u003eInstallation and Safety Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemove Birdboss when the boat is under way and in extreme winds (over 40 knots).\u003c\/li\u003e\n\u003cli\u003ePosition Birdboss so the arms can rotate freely, clear of rigging, antennas, canopies and people.\u003c\/li\u003e\n\u003cli\u003eAdjust the Birdboss arms evenly so the unit stays balanced.\u003c\/li\u003e\n\u003cli\u003eCheck the mount, StarPort lock and Birdboss fittings regularly, especially after rough weather.\u003c\/li\u003e\n\u003cli\u003eRinse the mount and BRAB with fresh water after exposure to salt spray.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNot sure which mount suits your boat? \u003ca href=\"\/pages\/contact-1\"\u003eSend us a photo and measurements\u003c\/a\u003e and we’ll recommend the best option.\u003c\/p\u003e\n\u003ch3\u003eRelated Links\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/railblaza-mounting-options-for-birdboss\"\u003eAll Railblaza Mounting Options for Birdboss\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/which-railblaza-mount-do-i-need\"\u003eWhich Railblaza Mount Do I Need?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/birdboss-base-kit\"\u003eBirdboss Base Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fixing-instructions\"\u003eBirdboss Fixing \u0026amp; Installation Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BIRDBOSS","offers":[{"title":"Default Title","offer_id":50591073501401,"sku":"BRAB","price":34.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/3330\/1465\/files\/birdboss-brab-aluminium-plate-starport-adaptor.jpg?v=1791260535"}],"url":"https:\/\/birdboss.com\/collections\/railblaza-mounting-options-for-birdboss.oembed","provider":"BIRDBOSS","version":"1.0","type":"link"}